Get answers to questions about how to build a new custom home in North Carolina – with information for first time home buyers as well as experienced buyers.

How can a lot walk save trees – and some green?

Posted by Travars Built Homes on February 27, 2019

What’s the best way to save trees when you build your new house? What roles do planning and surveying play in tree preservation? Here’s what you need to know before you clear your lot.

Never clear your lot before you talk with the county building department and your builder – especially if you will need a septic system.

Travars Built Homes provide a lot walk and assessment that includes a discussion of tree retention, before any clearing occurs. Your builder will also discuss things like the slope of the lot, possible water routes, the footprint of your home and its build site. You’ll learn a lot about the first stages of the build – as well as ways to save tree trunks and greenbacks.

Wendell North Carolina New Homes | All Brick Homes

There are also rules about how much can be cleared due to impervious limits, environmental regulations, government mandated erosion requirements, easements and other imperatives.

The amount of clearing required is based on your house footprint, based on the perimeter of your home with about 15-20′ of clearing on each side of your home, when the lot and setbacks allow for it. That amount of space provides room for sidewalks, parking pads, fences and foot traffic to get around the house.

Unless you request more tree removal – within the parameters of what is allowed for your location – it is our goal to retain every tree possible within the area that we need to safely get your home built. When your desire is to have a wooded lot, we want to preserve that natural beauty for you as much as possible.

If your home needs a septic system, the amount of trees removed in your septic field depend on specific requirements and there are areas that cannot be disturbed, to allow for that critical system to be installed and function properly.

It is not always possible to save every tree that you would like to retain. Trees have varying root systems, some of which are more extensive than others. White oak, Hickory and Walnut trees have some of the deeper root systems. Pine trees (which there are many of in North Carolina) have shallow root systems that can be less stable. For the most part roots are 12-24″ deep and extend out from the tree in a radius. You can measure tree diameter at chest height and multiple that by 12 to get a good idea of where roots end. The drip line or canopy can also be used as a rough guide, with the furthest branch as your measurement.

Contact us to schedule your lot walk where your home site determinations will be provided. We will discuss site work for the fit of your home to your lot. This pre-construction meeting on site with your builder will help you envision where your home and driveway can be placed.

Top 4 Ways to Boost Curb Appeal of Your New Home

Posted by Travars Built Homes on February 1, 2019

Love the layout, hate the exterior of the custom floor plan you want to build? Change it! Here are 4 ways to increase curb appeal in the Chapel Hill area by considering different exterior materials for the build of your new home, with pros and cons.

Custom Home Exterior Material Example #1: Vinyl Siding

If you want to save money, vinyl is an exterior material worth considering. Be sure to take your time with your color selection, and take a look at all the options.

Pros: Want a more custom look? You can dress things up with shutters, gable vents, corbels or column wraps. Vinyl can be cleaned with power washing and typically would not be repainted at a later date.

Cons: Some communities do not allow vinyl exteriors. Vinyl siding may fade – with darker colors absorbing more sunlight than lighter colors. It can also expand and shrink with temperatures.

Custom Home Exterior Material Example #2: Vinyl Siding and Veneer

A small amount of stone veneer and picture frame details around the windows can make a big difference. The stone water table provides another texture for this home, and won’t break the bank if the amount of stone is kept to just enough for a water table and column base. If you are doing exterior selections, consider picking the stone first. Then choose roofing with a similar color scheme, such as Drift Wood or Weathered Wood shingles.

Custom Home Exterior Material Example #3: Fiber Cement Siding With Stone Accents

The curb appeal of this fiber cement and stone home does a very nice job of blending multiple texture types and materials. The medium blue shakes seen on the face of the garage wall break the patterned straight lines. They also pull the color right out of the stone veneer below. The light blue lap siding on the sides and rear of home and complementing white picture frames around the windows, gable vents and gutters combine to make a well balanced exterior. The Mackenzie seen just below follows this formula and also looks great!

Pros: The mix of materials and colors make this home feel custom and comfortable. Adding stone to the front but keeping the other 3 sides of the home in fiber cement saves on cost.

Cons: Fiber cement costs more than vinyl. Stone veneer costs more than fiber cement.

**Request a build price for the Mackenzie, here.**

Custom Home Exterior Material Example #4: All Brick and Stone

The classic look of full brick veneer creates curb appeal so compelling that some entire communities require it. This full brick home is even more interesting due to the brick color choice and the stone front accent on the garage face.

Pros: Bricks are sturdy and durable, typically requiring almost no maintenance other than occasional power washing.

Cons: That low maintenance and solid look comes with a higher price tag than most exterior materials.

Get information about building a custom home with Travars Built Homes – including more ways to create a cost effective new home in North Carolina.

3 Ways to Get a Better Bathroom for Your Guests

Posted by Travars Built Homes on January 24, 2019

Here are 3 different floor plan layout approaches for your guest suite bathroom from design build custom home builder Travars Built Homes:

White and Black Bathrooms | Mebane NC New Homes

Approach #1 The bathroom is attached to the guest bedroom and hallway.

Approach #2 The bathroom is between two bedrooms (also know as a “Jack and Jill” bath)

Approach #3 The bathroom is only accessible through the bedroom – this allows for complete privacy.

Design Build Custom Home Process

Build On Your Lot North Carolina

Guest Suite Bathroom Idea #1: Bath Shared with Common Areas

One of the most common layouts for a guest suite maximizes usability while minimizing cost by including a full bath with access from both the guest bedroom and main areas.

The layout has a second door from the guest bedroom directly into the bath so guests have full privacy but homeowners are spared the expense of an additional private bath.

See more of this modern farmhouse, the Norwich here:

Modern Farmhouse Floor Plan | Pittsboro New Home Builder

Guest Suite Bathroom Idea #2: Jack and Jill Bath

This floor plan illustrates a “Jack and Jill” bathroom, where two bedrooms share a bathroom. With this layout, a guest would share a bathroom with someone in another bedroom, but would have the ability to close off that bathroom.

Jack and Jill Floor Plan | Pittsboro New Home Builder

This floor plan, the Blackstone also has a powder room on the main floor, so the designation of this layout would be that the Jack and Jill bathroom would typically be limited to use by people in those two bedrooms, with semi-private usage.

Guest Suite Bathroom Idea #3: Full, Private Bath

In this floor plan, there is already a full bath beside the mudroom and guest bedroom. With a small expansion to the exterior wall of the bathroom, we can change the functionality of the space.

Take a look at the redline modifications. By expanding the bathroom slightly, it can be accessed en-suite, providing total privacy for the guest suite:

The redline modification at the foyer illustrates how to add a separate powder room on the main floor.

Get in touch with the team at Travars Built Homes for more floor plans and details about building a new home in Chapel Hill, Durham, Pittsboro, or another area in central North Carolina.

Category: How to Build a New Home

What’s the best way to save trees when you build your new house? What roles do planning and surveying play in tree preservation? Here’s what you need to know before you clear your lot.

Never clear your lot before you talk with the county building department and your builder – especially if you will need a septic system.

There are also rules about how much can be cleared due to impervious limits, environmental regulations, government mandated erosion requirements, easements and other imperatives.

If your home needs a septic system, the amount of trees removed in your septic field depend on specific requirements and there are areas that cannot be disturbed, to allow for that critical system to be installed and function properly.

Contact us to schedule your lot walk where your home site determinations will be provided. We will discuss site work for the fit of your home to your lot. This pre-construction meeting on site with your builder will help you envision where your home and driveway can be placed.

Love the layout, hate the exterior of the custom floor plan you want to build? Change it! Here are 4 ways to increase curb appeal in the Chapel Hill area by considering different exterior materials for the build of your new home, with pros and cons.

Custom Home Exterior Material Example #1: Vinyl Siding

If you want to save money, vinyl is an exterior material worth considering. Be sure to take your time with your color selection, and take a look at all the options.

Pros: Want a more custom look? You can dress things up with shutters, gable vents, corbels or column wraps. Vinyl can be cleaned with power washing and typically would not be repainted at a later date.

Cons: Some communities do not allow vinyl exteriors. Vinyl siding may fade – with darker colors absorbing more sunlight than lighter colors. It can also expand and shrink with temperatures.

Custom Home Exterior Material Example #2: Vinyl Siding and Veneer

Custom Home Exterior Material Example #3: Fiber Cement Siding With Stone Accents

Pros: The mix of materials and colors make this home feel custom and comfortable. Adding stone to the front but keeping the other 3 sides of the home in fiber cement saves on cost.

Cons: Fiber cement costs more than vinyl. Stone veneer costs more than fiber cement.

Custom Home Exterior Material Example #4: All Brick and Stone

The classic look of full brick veneer creates curb appeal so compelling that some entire communities require it. This full brick home is even more interesting due to the brick color choice and the stone front accent on the garage face.

Pros: Bricks are sturdy and durable, typically requiring almost no maintenance other than occasional power washing.

Cons: That low maintenance and solid look comes with a higher price tag than most exterior materials.

Get information about building a custom home with Travars Built Homes – including more ways to create a cost effective new home in North Carolina.

Here are 3 different floor plan layout approaches for your guest suite bathroom from design build custom home builder Travars Built Homes:

Approach #1 The bathroom is attached to the guest bedroom and hallway.

Approach #2 The bathroom is between two bedrooms (also know as a “Jack and Jill” bath)

Approach #3 The bathroom is only accessible through the bedroom – this allows for complete privacy.

Guest Suite Bathroom Idea #1: Bath Shared with Common Areas

One of the most common layouts for a guest suite maximizes usability while minimizing cost by including a full bath with access from both the guest bedroom and main areas.

The layout has a second door from the guest bedroom directly into the bath so guests have full privacy but homeowners are spared the expense of an additional private bath.

See more of this modern farmhouse, the Norwich here:

Guest Suite Bathroom Idea #2: Jack and Jill Bath

This floor plan illustrates a “Jack and Jill” bathroom, where two bedrooms share a bathroom. With this layout, a guest would share a bathroom with someone in another bedroom, but would have the ability to close off that bathroom.

This floor plan, the Blackstone also has a powder room on the main floor, so the designation of this layout would be that the Jack and Jill bathroom would typically be limited to use by people in those two bedrooms, with semi-private usage.

Guest Suite Bathroom Idea #3: Full, Private Bath

In this floor plan, there is already a full bath beside the mudroom and guest bedroom. With a small expansion to the exterior wall of the bathroom, we can change the functionality of the space.

Take a look at the redline modifications. By expanding the bathroom slightly, it can be accessed en-suite, providing total privacy for the guest suite:

The redline modification at the foyer illustrates how to add a separate powder room on the main floor.

Get in touch with the team at Travars Built Homes for more floor plans and details about building a new home in Chapel Hill, Durham, Pittsboro, or another area in central North Carolina.